THOMSON ST2022 FIRMWARE DOWNLOAD

You have to choose config. The first thing here is the password prompt. Once you are ready with the configuration, you have to reboot the phone. In order to actually log in as administrator you have to do the following: The last step is to reboot the device. You could use the keypad. The phone will turn in Config mode.

Uploader:	Kimi
Date Added:	25 December 2005
File Size:	25.49 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	86898
Price:	Free* [*Free Regsitration Required]

When you see Ready to Config written on the phone's display, you have to press the menu button firmwars. The second section - Reset - allows you to reset the phone device to the factory default settings.

If all the settings are correct the phone will boot quickly and it will be cirmware to be used. The name of the option where you could change your Caller ID is Name and the name of the option for the display name is User.

Thomson ST SIP Manuals

Such clever work and reporting! Once you select the Acct menu, you will see the Acct submenu where you could change either the authentication username or the sst2022 password.

The second way is to use the through your web browser by using the phone's web interface. Press OK to enter the IP option.

Once you press it you will be able to choose between two possible options - Info and Config. On the third page you could choose between Boot and Admin. Ethernet - IEEE The user section does not require password. They will be used by the phone device to register on our Thkmson. In our case we will test it by dialing the number at which our Idefisk softphone is attached.

However, only one profile could be active at a particular moment.

Thomson ST2022 SIP Manuals

First lets see how we can make configurations through the phone device. In order to restore the factory settings of the phone, please do the following: If you are ready with all the changes press Reboot.

First you have to type the username and password used for authentication on the Asterisk They have to be absolutely the same as the ones set in the Asterisk's sip.

We purchased 13 phones, 2 of which have gone defective after only 2 months. From this menu choose a desired profile. Do not use the Girmware key, because it will return you in the previous menu.

In order to enter this option press the OK key.

Thomson ST SIP hardphone

The last step is to reboot the device. I will be experiencing tnomson In your case you could use something else. If you want to change this you have to disable the DHCP.

The problem is the LAN network jack on the phone stops working.

I love what you guys are always up too. The phone has 3 soft buttons which are used to perform different operations. Half of us here are teenagers which just wank, including me ofc. When you make a change in a menu, you have to press the Save button. Once you enter the correct password, you will be able to change the following settings: The phone will go in Config Mode. In our case we will set both to thomsonbecause these are the username and secret configured in our sip.

You could leave them with their default values.